Home | About us | Editorial board | Ahead of print | Current issue | Archives | Search | Submit article | Instructions | Subscribe | Advertise | Contact us |  Login 
National Journal of Maxillofacial Surgery
 
Print this page Email this page Small font sizeDefault font sizeIncrease font size
Users Online: 846
 


 
Table of Contents
CASE REPORT
Year : 2015  |  Volume : 6  |  Issue : 2  |  Page : 232-236  

Custom ocular prosthesis in rehabilitation of a child operated for retinoblastoma


1 Department of Prosthodontics, Faculty of Dental Sciences, King George's Medical University, Lucknow, Uttar Pradesh, India
2 Clove Dental, New Delhi, India

Date of Web Publication10-Jun-2016

Correspondence Address:
Dr. Mayank Singh
Department of Prosthodontics, Faculty of Dental Sciences, King George's Medical University, Lucknow - 226 003, Uttar Pradesh
India
Login to access the Email id

Source of Support: None, Conflict of Interest: None


DOI: 10.4103/0975-5950.183871

Rights and Permissions
   Abstract 

A maxillofacial prosthodontist forms an important link in the interdisciplinary management of a patient with anopthalmosis. Prosthetic management of an anopthalmic defect aims to deliver a well-fitting ocular prosthesis that can mimic the original eye as closely as possible, and thus restoring the patient's self-confidence and thereby rehabilitating them in the society. The fabrication of a custom ocular prosthesis is a demanding art. This case report presents a simplified technique for the fabrication of a custom ocular prosthesis for a child who had lost his eye to enucleation following retinoblastoma. Early and effective rehabilitation of the defect goes a long way in restoring the self-image of a child in its early character building age.

Keywords: Ocular implants, ocular prosthesis, quality of life, retinoblastoma


How to cite this article:
Shah V, Yadav L, Singh M, Kharbanda S. Custom ocular prosthesis in rehabilitation of a child operated for retinoblastoma. Natl J Maxillofac Surg 2015;6:232-6

How to cite this URL:
Shah V, Yadav L, Singh M, Kharbanda S. Custom ocular prosthesis in rehabilitation of a child operated for retinoblastoma. Natl J Maxillofac Surg [serial online] 2015 [cited 2022 Oct 7];6:232-6. Available from: https://www.njms.in/text.asp?2015/6/2/232/183871


   Introduction Top


Retinoblastoma is a highly malignant tumor of the eye that manifests most often in the first 3 years of life. It is the most common intraocular malignancy in children. It accounts for 2.5–4% of all childhood cancers in most developed countries while substantially higher rates are occurring in developing countries.[1] Studies from India, show a two- to three-fold higher incidence of tumors of the eye (the majority of which will be retinoblastoma in children <15 years of age).[2] The survival rate is about 95% in developed countries, but only about 50% worldwide. This could be attributed to delay in presentation due to ignorance, poverty, illiteracy, alternative systems of medicine, and lack of access to healthcare resources in developing countries.

Enucleation is the choice of treatment for unilateral intraocular retinoblastoma. Surgical procedures for the removal of an eye are classified into three general categories: Evisceration, enucleation, and exenteration.[3] Considerations in the prosthetic treatment of ocular and orbital defects have been reported.[4] The loss of an eye can lead to significant functional and psychosocial impacts affecting the sociometric stability. The loss of an eye due to congenital malformation, tumor treatment, or trauma can lead to serious functional, physical as well as psychological effects. However with the advancement in ophthalmic surgery and ocular prosthetics, the anopthalmic patient can be rehabilitated very effectively.[5] Patient satisfaction with an ocular prosthesis is relatively high.[6] Generally a conformer is advised during the initial 6 weeks; however, early insertion of the ocular prosthesis has been found to improve the quality of life.[7] A custom ocular prosthesis is individually constructed and characterized to match the patient's natural eye, but it is a time-consuming process and a difficult art to master.

The following case report describes a simple yet effective method of fabricating a custom ocular prosthesis for a young child operated for retinoblastoma.


   Case Report Top


A 6-year-old boy was referred to the Department of Prosthodontics from the Department of Pediatric Surgery for the prosthetic rehabilitation of an enucleated right eye [Figure 1]. The detailed anamnesis and careful study of the records revealed that the patient had reported to the Department of Ophthalmology with the loss of vision in the right eye. The diagnostic workup led to the diagnosis of retinoblastoma of the right eye. The right eye was enucleated and a hydroxyapatite orbital implant place at the time of surgery. After satisfactory healing, the patient was now referred for prosthetic management.
Figure 1: Preoperative view showing anopthalmic right eye

Click here to view


A detailed examination of the enucleation socket revealed health tissue bed [Figure 2]. The socket bed had reasonable movement due to the underlying implant, and the case was deemed fit for the fabrication of a custom ocular prosthesis. The treatment plan was explained to the patient's guardian, and written consent was obtained for the same. The child was a bit timid and apprehensive probably because of the psychological effects of surgery and anopthalmosis at the tender age. The steps involved in the fabrication were demonstrated to the child, so as to win his confidence and cooperation during the procedure.
Figure 2: Detailed inspection of the enucleated socket

Click here to view


To begin with, the anopthalmic socket of the right eye was cleaned of debris and secretions. An impression of the socket was made with irreversible hydrocolloid mixed with cold water and loaded in a thin consistency in a syringe. A stock conformer was modified suitably to act as a custom impression tray. During the impression making, the patient was instructed to fix the gaze at a distant object. The set impression was gently removed from the socket and inspected for accuracy [Figure 3]. The impression was later boxed and poured in dental stone (Kala Stone, Kalabhai Pvt. Ltd., Mumbai, India) using the 2 pour technique. The set cast was retrieved and prepared for the fabrication of wax pattern. Separating media was applied to the cast, and molten wax (Modeling Wax, Dental Products of India Ltd., Mumbai, India) was poured into the defect part of the cast. The wax pattern was carved to achieve an arbitrary contour of the eye. The fit of the wax pattern was checked in the patient and extension of the wax pattern in the fornices evaluated. The contour of the pattern was adjusted to match the contralateral eye [Figure 4]. Upon satisfactory carving of the wax pattern, the challenge is to replicate the position of the iris. Fabrication of a custom painted iris is painstaking and technique demanding. Hence, a color matched iris was retrieved from a stock prosthesis [Figure 5]. The location of the iris was marked on the wax pattern while the patient has fixed the gaze on a distant object. The sock iris was incorporated in the wax pattern and the contours of the wax pattern readjusted [Figure 6]. The wax pattern was finally tried in the patient and assessed in terms of fit and accuracy in fixed gaze as well as functional movements [Figure 7]. The finalized wax pattern was prepared for investment and processing. A stump made of clear self-cure polymethyl methacrylate (PMMA) was attached to the iris, so as to maintain its orientation during processing. The prepared wax pattern was invested in a special ocular flask and dewaxed [Figure 8]. Red nylon fibers were used for characterization of vessels on the scleral surface and heat cured tooth colored PMMA (Dental Products of India Ltd., Mumbai, India) of an appropriate shade was mixed and packed into the dewaxed mold cavity. The flask was packed and allowed to bench cure before curing it in boiling water for 1 h. The cured pattern was retrieved from the flask and finished. The surface of the prosthesis was reduced uniformly by about 0.5 mm and reinvested using heat-cured clear PMMA. The cured prosthesis was retrieved, finished, and polished [Figure 9]. The finished prosthesis was disinfected and inserted into the ocular socket and assessed for fit [Figure 10]. The patient was instructed to wet the prosthesis before insertion. The prosthesis can be worn day and night with the need to clean once a day with soap water. Finally, the importance of regular follow-up was reinstated.
Figure 3: Impression made in irreversible hydrocolloid

Click here to view
Figure 4: Wax pattern trial

Click here to view
Figure 5: Iris retrieved from stock ocular prosthesis

Click here to view
Figure 6: Finalized wax pattern

Click here to view
Figure 7: Final wax pattern try-in

Click here to view
Figure 8: Prosthesis invested and dewaxed in an ocular flask

Click here to view
Figure 9: Finished prosthesis

Click here to view
Figure 10: Finished prosthesis delivered to the patient

Click here to view



   Discussion Top


Our knowledge of the outside world depends on our modes of perception. Eyes are one of the most specialized and developed sensory organs of the body. Loss of an eye has a deep effect on the psyche of a patient. In the present case report, the surgery and the loss of an eye had a significant psychological impact on the patient. The parents reported peer rejection and the subject's disorientation from going to school and other group play activities. Therefore, fabrication of an ocular prosthesis was of significant importance in rehabilitation, which could further ensure to improve the psyche of the patient with the primary foci on child's peer acceptance.

The placement of an ocular implant at the time of surgery helped in maintaining the volume of the defect, and significantly improved the mobility of the prosthesis. An implant attached to the ocular muscles gives a degree of movement to the prosthetic eye as well. The implants are most commonly classified as nonintegrated (nonporous) and integrated (porous).[8] A nonintegrated implant has no unique system for attachment to the extraocular muscles and do not allow for organic tissues into their structure. They include PMMA, glass, or silicone spheres. PMMA is the material of choice among nonintegrated implants. An integrated implants, by the virtue of being porous, allows for fibrovascular ingrowth throughout the implant. They may be made of hydroxyapatite, aluminum oxide, or polyethylene.

In the replacement of a missing eye, fabrication of a custom ocular prosthesis is favored over a stock eye. However, the fabrication of a custom ocular prosthesis can be a demanding art. The steps in fabrication were simplified to achieve excellent results with minimal resources. Furthermore, various impression procedures have been reported in the literature;[9],[10],[11],[12],[13],[14],[15] irreversible hydrocolloid was preferred in this case for its acceptable surface reproducibility and ease of manipulation. The use of color matched iris from a stock prosthesis eliminated the need for complex artistic iris painting. The heat cured PMMA was best suited for the case as the young patient was prone to accidentally dropping and damaging the prosthesis.


   Conclusion Top


The management of a young patient with retinoblastoma is an interdisciplinary challenge. The prosthodontist plays an important role by fabricating a well-crafted ocular prosthesis and in-turn rehabilitating the patient on emotional as well as the social front.

Declaration of patient consent

The authors certify that they have obtained all appropriate patient consent forms. In the form the patient(s) has/have given his/her/their consent for his/her/their images and other clinical information to be reported in the journal. The patients understand that their names and initials will not be published and due efforts will be made to conceal their identity, but anonymity cannot be guaranteed.

Financial support and sponsorship

Nil.

Conflicts of interest

There are no conflicts of interest.

 
   References Top

1.
Shields CL, Shields JA. Diagnosis and management of retinoblastoma. Cancer Control 2004;11:317-27.  Back to cited text no. 1
    
2.
Arora RS, Eden TO, Kapoor G. Epidemiology of childhood cancer in India. Indian J Cancer 2009;46:264-73.  Back to cited text no. 2
[PUBMED]  Medknow Journal  
3.
Perman KI, Baylis HI. Evisceration, enucleation, and exenteration. Otolaryngol Clin North Am 1988;21:171-82.  Back to cited text no. 3
    
4.
Parr GR, Goldman BM, Rahn AO. Surgical considerations in the prosthetic treatment of ocular and orbital defects. J Prosthet Dent 1983;49:379-85.  Back to cited text no. 4
[PUBMED]    
5.
Beumer J, Marunick MT, Esposito SJ. Maxillofacial Rehabilitation: Prosthodontic and Surgical Management of Cancer-Related, Acquired, and Congenital Defects of the Head and Neck. Hanover Park: Quintessence Publication; 2011.  Back to cited text no. 5
    
6.
Song JS, Oh J, Baek SH. A survey of satisfaction in anophthalmic patients wearing ocular prosthesis. Graefes Arch Clin Exp Ophthalmol 2006;244:330-5.  Back to cited text no. 6
    
7.
Chin K, Margolin CB, Finger PT. Early ocular prosthesis insertion improves quality of life after enucleation. Optometry 2006;77:71-5.  Back to cited text no. 7
    
8.
Shome D, Honavar SG, Raizada K, Raizada D. Implant and prosthesis movement after enucleation: A randomized controlled trial. Ophthalmology 2010;117:1638-44.  Back to cited text no. 8
    
9.
Bartlett SO, Moore DJ. Ocular prosthesis: A physiologic system. J Prosthet Dent 1973;29:450-9.  Back to cited text no. 9
[PUBMED]    
10.
Brown KE. Fabrication of an ocular prosthesis. J Prosthet Dent 1970;24:225-35.  Back to cited text no. 10
[PUBMED]    
11.
Maloney B. Development of impression fitting equipment: A new technique. J Am Soc Ocularists 1979;9:32-3.  Back to cited text no. 11
    
12.
Engelmeier RL. Autoclavable custom-made metal impression trays to improve infection control. J Prosthet Dent 1987;58:121-2.  Back to cited text no. 12
[PUBMED]    
13.
Sykes LM, Essop AR, Veres EM. Use of custom-made conformers in the treatment of ocular defects. J Prosthet Dent 1999;82:362-5.  Back to cited text no. 13
    
14.
Ow RK, Amrith S. Ocular prosthetics: Use of a tissue conditioner material to modify a stock ocular prosthesis. J Prosthet Dent 1997;78:218-22.  Back to cited text no. 14
    
15.
Mathews MF, Smith RM, Sutton AJ, Hudson R. The ocular impression: A review of the literature and presentation of an alternate technique. J Prosthodont 2000;9:210-6.  Back to cited text no. 15
    


    Figures

  [Figure 1], [Figure 2], [Figure 3], [Figure 4], [Figure 5], [Figure 6], [Figure 7], [Figure 8], [Figure 9], [Figure 10]


This article has been cited by
1 Rare tumors: Retinoblastoma, nasopharyngeal cancer, and adrenocorticoid tumors
Samir Patel,Jennifer Vogel,Kristin Bradley,Paul J. Chuba,Jeffrey Buchsbaum,Matthew J. Krasin
Pediatric Blood & Cancer. 2021; 68(S2)
[Pubmed] | [DOI]
2 An Overview of Retinoblastoma and Enucleation in Pediatric Patients
Rachel Leclerc,Jennifer Olin
AORN Journal. 2020; 111(1): 69
[Pubmed] | [DOI]



 

Top
   
 
  Search
 
    Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Related articles
    Access Statistics
    Email Alert *
    Add to My List *
* Registration required (free)  

 
  In this article
    Abstract
   Introduction
   Case Report
   Discussion
   Conclusion
    References
    Article Figures

 Article Access Statistics
    Viewed1902    
    Printed70    
    Emailed0    
    PDF Downloaded276    
    Comments [Add]    
    Cited by others 2    

Recommend this journal